Glitter & Sequin Ornaments

Tutorial video of making a glitter and sequined Christmas ornament using a foam ball and homemade glitter paint.

I love the sparkle and shine of a well-made glitter ornament. There are many different types and methods of making glitter ornaments, including glass ornaments. I live in a country prone to earthquakes and try to avoid any decoration made of glass that could fall and break, so glass ornaments are not practical for me. I prefer to use unbreakable foam balls and glitter paint.

Making Glitter Paint

In my method, I use ribbon and sequins to create sections on my foam ball and then cover the exposed foam with homemade glitter paint. I’ve experimented a lot over the years with different types of glue and loose glitter. Here’s everything I’ve learned so far:

Sometimes, I use regular store-bought glitter glue. Usually, I want the clear, iridescent kind when I want a glittery white background. Most of the time, I make my own glitter glue that I like to call “glitter paint,” using a mix of store-bought glitter glue or regular clear glue and loose glitter.

My glitter paint is simple. I used fine-grained loose glitter and mixed it with clear synthetic glue. Fine-grained glitter works best. I purchased the clear synthetic glue in the school supply section at my local 100 yen shop in Japan (equivalent to the dollar store in the USA). When I originally purchased the glue, I didn’t know if it was going to work the way I wanted it to. I just saw that it was perfectly clear in the bottle and decided to try it. I mixed the glitter and glue together until I got a consistency I was happy with. If it has too much glue, it will run down the sides of the ornament when drying and won’t give good coverage. If it has too much glitter, it will be of a chunky consistency and won’t lay smoothly on the foam. My best advice is to experiment until you get it right. You will need to use several layers for an opaque look.

When applying the glitter glue, put on a very thick layer (a few millimeters thick). It might look lumpy and uneven when wet, but once it is dried it becomes flat against the surface. Again, you’ll have to put on several layers if you don't want to see the underlying foam. It's also a good opportunity when layering to fill in those annoying gaps in the paint. I always use several coats.

I use two different types of glue for making my glitter paint. I mix fine-grained loose glitter with either to make my glitter paint.
1. Clear synthetic glue, purchased in Japan.
2. Glitter Glue by Sulyn Industries, which I purchased at Hobby Lobby many years ago. On the glitter glue label, is says, “sticks to craft foam, paper, and wood”.

Glitter glue/paint takes a long time to dry. Do not use a hair dryer to dry the glue. Just be patient and let the glue dry naturally. In my experience, if you use a hair dryer, the glitter will lose its sparkle.

Here is an Email I received from one of my readers. She wasn’t having any success with my technique, so she tried something different.

Hi Alyx, 
I wrote to you before because I was having trouble painting on my glitter with the glitter glue.  I tried all kinds of glue. Nothing worked for me.  So I got out my Liquitex gloss medium and varnish that I use with my acrylic paints.
I did it two ways and both ways worked wonderfully.  The first way was I mixed about a tsp of gloss medium and added the fine glitter.  I mixed it up and it was cloudy and then poured a little more and stirred.  Then I brushed, dabbed on the glitter and then used my hair dryer and set it.  The second way I brushed on the medium and sprinkled on the glitter.  Dusted it off and then dabbed on a loaded brush and pressed lightly onto the glitter.  Then I sprinkled on more glitter and dusted off the extra.  I then used my hair dryer again.  The glitter does not lose its shine.  Let dry 24 hours to cure completely.  You can buy liquitex gloss medium and varnish anywhere where they sell paint and artist supplies. 
Sincerely, Arilla

Sequins and Seed Beads

I prefer to use 5 mm slightly cupped metallic sequins on my ornaments. However, this is just a personal preference, and there is no reason why you can't use a larger size, flat, or a different finish, such as satin or matte. Part of the joy of making these ornaments is the experimentation and finding what works for you. 

It’s important to use a seed bead when you are pinning sequins to your ornament if the head of your pins is smaller than the hole in the sequin. The bead prevents the sequin from falling off the end of the pin, and it also gives texture to your ornament. If the head of your pins is larger than the hole in your sequins, then you don’t have to use a bead.

It is also important to use glue on the end of the pins before pushing them into the foam. The glue helps prevent the pins from coming loose and falling out.